TECHNICAL DETAILS

Properties I. S. STANDARD LIMITS
AS PER IS : 2046 /1995		 OUR PRODUCT
PERFORMANCE
Nominal thickness 1.5mm ± 0.2mm 1.5mm ± 0.10mm
Straightness of edges of rectangular finished panel For panels of length 0.6m and above within ± 0.06 Lmm Within ± 0.04 LMM
Squareness of finished panel rectangular 3.0mm (Max) 2.00mm
Resistance of dry heat Test at 180°C ± 1 for 20 mins Tested at 180° ± 1 for 25 mins.No surface deterioration.2.00mm
Dimensional Stability Change shall not be greater than 0.20mm(machine directiMn) 0.30mm(Cross direction) Found to be within 0.15 to 0.20mm(Machine direction) 0.25 to 0.30)Cross direction)
Resistance to boiling Time water Specified 2 hours ± 5mins. increase in 10% max. thickness Tested for 2 hrs. ± 5 mins. 4% increase in thickness and 4% increase in weight
Cross breaking strength
  1. With decorative face in tension 850 kgf/cm2
  2. With decorative face in compression 1200kgf/cm2
 1000kgf/cm2

1400kgf/cm2
Impact strength Not less than 0.035 kgf.m. 0.045 kgf.m.
Machining Properties Good Excellent
Resistance to steam Not worse than grade 4 No visible change
Resistance to spread of flame 50 Seconds 10 to 30 Seconds
Stain Resistance
  1. Artificial Perspiration
  2. Blood-human
  3. Citric Acid Solution
  4. Coffee
  5. Cooking Fat
  6. Disinfectant Fluids
  7. Gasolene
  8. Ink
  9. Rectified Spirit
  10. Kerosene
  11. Milk or Lassi(Butter Milk)
  12. Sodium Hydroxide Solution
 No Blistering Discolouration
Resistance to surface wear a)350 revolutions(of standard piece) for print paper.
b)400 revolutions for plain colours.		 a)400 revolutions observed for print paper
b)450 revolutions for plain paper


Back